JYM-15/200 Loadbreak Insulated Cap
General 15kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing inte rfaces.When mated to a loadbreak product and the d rain
General
15kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing inte rfaces.When mated to a loadbreak product and the d rain wire is attached to ground,the Insulated Protective Cap provides a fully shielded , submersible insulating cover for energized bushings . The Insulated Protective Cap can be used for permanent or temporary installation on 200A bushings ,junctions or insulated standoff bushing .
Scope of Delivery
·Insulated protective cap
·Clearing paper
·Silicone lubricant
·Installation instruction sheet
·Quality certificate
OrderInformation
| Description | Reference No. | Continuous operating voltage | Gontinuous nominal current |
| 200A15kV Insulated Protective Cap | JYM-15/200 | 15kV | 200A |
Inference Information
①Enterprise code
②Insulated Protective Cap
③Continuous operating voltage
④Continuous nominal current
Product Structure
1.Insulation : High-quality EPDM rubber formulated, mixed , and milled in-house for consistent and reliable field performance.
2.Semi-conductive shield: High-quality EPDM rubber provides protective deadfront shield that meets requirements of IEEE Standard 592.
3.Grounding eye: three tabs molded into a semi-conductive shield forthe attachment ofa ground wire to maintain deadfront safety.
4.Pulling eye: Stainless steel reinfo rced for positive shotgun stick switching operations.
Figure 1：Dimensions
Figu re 2:Ⅲustrate Design Integrity
