WhatsApp: +86 17857091231    Email: sky@dowechina.com

Products

  1. Home
  2. Products
  3. Heat Shrink Tube Accessories
  4. Adhesive-Lined Heat Shrink Tubing

DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices

-45~+110 MinShrink80 Shrink3:1 Fireproof DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices Rainproof DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices RoHS

APPLICATIONS

The outer layer of DWBS heat shrinkable tubing is made of high density polyethylene, and the inner layer is coated with polyamide hot melt adhesive. It is used for heat shrinkable terminals and heat shrinkable crimp splices. The tough outer layer of the product can resist the possible damage caused by the terminal clamping operation, and the inner hot melt adhesive with a temperature resistance of 105˚C meets the requirements of high temperature environments, such as the automotive engine room. This tubing provides excellent resistance to abrasion, water and corrosion for complete insulation and electrical connection protection.

APPROVALS / SPECIFICATIONS

DUWAI DWBS - Watertight Tube for Terminals and Crimp SplicesUL224

OPERATING TEMPERATURE RANGE

  • Continuous operating temperature: -55℃ ~ 105℃
  • Minimum shrink temperature: 80℃
  • Full recovery temperature: Above 130˚C

COLOR

DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices

Standard color: red, blue and yellow, (Other colors, special sizes, and cut pieces are available on request.)

Inquiry
DUWAI DWBS - Watertight Tube for Terminals and Crimp Splices
  • Shrink ratio: 3:1
  • Semi-rigid, abrasion resistant
  • Waterproof, moisture proof and UV resistant
  • Excellent electrical insulation properties
  • Compliance with RoHS and REACH environmental regulations

 

 

<table> <tbody> <tr> <td colspan="2"> <p>Technical Data</p> </td> <td> <p>&nbsp;</p> </td> <td> <p>&nbsp;</p> </td> </tr> <tr> <td> <p>Property</p> </td> <td> <p>Specification Requirement</p> </td> <td> <p>Test Method</p> </td> <td> <p>Typical Value</p> </td> </tr> <tr> <td> <p>Tensile strength</p> </td> <td> <p>≥16MPa</p> </td> <td> <p>ASTM D2671</p> </td> <td> <p>≥19.5MPa</p> </td> </tr> <tr> <td> <p>Elongation at break</p> </td> <td> <p>≥200%</p> </td> <td> <p>ASTM D2671</p> </td> <td> <p>≥450%</p> </td> </tr> <tr> <td> <p>Tensile strength after aging</p> </td> <td> <p>≥11.5MPa</p> </td> <td> <p>ASTM D2671<br /> (136˚C/168 hrs)</p> </td> <td> <p>≥15MPa</p> </td> </tr> <tr> <td> <p>Elongation at break after aging</p> </td> <td> <p>≥100%</p> </td> <td> <p>ASTM D2671<br /> (136˚C/168 hrs)</p> </td> <td> <p>≥200%</p> </td> </tr> <tr> <td> <p>Dielectric voltage withstand</p> </td> <td> <p>AC2500V/60S<br /> No breakdown</p> </td> <td> <p>ASTM D2671</p> </td> <td> <p>No breakdown</p> </td> </tr> <tr> <td> <p>Heat shock</p> </td> <td> <p>No cracking</p> </td> <td> <p>ASTM D2671<br /> (250˚C/4 hrs)</p> </td> <td> <p>No cracking</p> </td> </tr> <tr> <td> <p>Volume resistivity</p> </td> <td> <p>≥1014Ω‧cm</p> </td> <td> <p>ASTM D2671</p> </td> <td> <p>≥1014Ω‧cm</p> </td> </tr> <tr> <td> <p>Copper corrosion</p> </td> <td> <p>No corrosion</p> </td> <td> <p>ASTM D2671<br /> (136˚C/168 hrs)</p> </td> <td> <p>No corrosion</p> </td> </tr> </tbody> </table> <table> <tbody> <tr> <td colspan="3"> <p>Specification</p> </td> <td colspan="2"> <p>&nbsp;</p> </td> <td> <p>&nbsp;</p> </td> </tr> <tr> <td rowspan="2"> <p>Part Number</p> </td> <td colspan="2"> <p>As supplied<br /> (mm)</p> </td> <td colspan="2"> <p>As recovery<br /> (mm)</p> </td> <td rowspan="2"> <p>Standard Length<br /> (Meter)</p> </td> </tr> <tr> <td> <p>I.D.</p> </td> <td> <p>W.T.</p> </td> <td> <p>I.D.<br /> (max)</p> </td> <td> <p>W.T.</p> </td> </tr> <tr> <td> <p>DWBS48</p> </td> <td> <p>4.8±0.3</p> </td> <td> <p>0.50±0.15</p> </td> <td> <p>1.6</p> </td> <td> <p>1.10±0.15</p> </td> <td> <p>100</p> </td> </tr> <tr> <td> <p>DWBS58</p> </td> <td> <p>5.8±0.3</p> </td> <td> <p>0.55±0.15</p> </td> <td> <p>1.9</p> </td> <td> <p>1.30±0.15</p> </td> <td> <p>100</p> </td> </tr> <tr> <td> <p>DWBS68</p> </td> <td> <p>6.8±0.3</p> </td> <td> <p>0.60±0.15</p> </td> <td> <p>2.4</p> </td> <td> <p>1.35±0.15</p> </td> <td> <p>100</p> </td> </tr> <tr> <td> <p>DWBS70</p> </td> <td> <p>7.0±0.3</p> </td> <td> <p>0.60±0.15</p> </td> <td> <p>2.5</p> </td> <td> <p>1.35±0.15</p> </td> <td> <p>100</p> </td> </tr> <tr> <td> <p>DWBS80</p> </td> <td> <p>8.0±0.3</p> </td> <td> <p>0.70±0.15</p> </td> <td> <p>3.0</p> </td> <td> <p>1.45±0.15</p> </td> <td> <p>50</p> </td> </tr> </tbody> </table> <p align="center" style="text-align:center">&nbsp;</p>
Top Products
DOWE MC S Series Mica Insulators for Railway & High-Speed Train Electrical Systems

DOWE MC S Series Mica Insulators for Railway & High-Speed Train Electrical Systems

View More
DOWE MC A Series Mica Insulator for High-Speed Trains & Railway Applications

DOWE MC A Series Mica Insulator for High-Speed Trains & Railway Applications

View More
DOWE MCCB Pan Assembly (MCPD) Copper Busbar Pan Assembly and Busbar Distribution Board For Electrical Distribution

DOWE MCCB Pan Assembly (MCPD) Copper Busbar Pan Assembly and Busbar Distribution Board For Electrical Distribution

View More
DOWE BTR-2 Series 250a / 400a / 630a 3p Netral Fuse Base Low Voltage Vertical Fuse Rail And Fuse Base For Busbar

DOWE BTR-2 Series 250a / 400a / 630a 3p Netral Fuse Base Low Voltage Vertical Fuse Rail And Fuse Base For Busbar

View More

Website Use Cookies

This website uses anonymous performance cookies to ensure you get the best experience on our website. We never use targeting or advertising cookies. Find out more: Cookies Policy

WhatsApp us